LifeSaver C1 Large Scale Purifier – High-capacity water filter
LifeSaver C1 Large Scale Purifier
The LifeSaver C1 Large Scale Purifier was developed as a reliable and powerful solution for purifying large quantities of drinking water. The system is designed to be easily connected to an above-ground water storage tank located at least two meters above the ground, but can also be connected to a municipal water supply. For proper operation, only a minimum water pressure of 0.2 bar (2.85 PSI) is required. Thanks to this low pressure requirement, the user only needs to open the tap to immediately obtain a strong and constant flow of safe drinking water, without additional steps.
The C1 uses the same high-quality ultrafiltration membranes that are used in all LifeSaver water purifiers. These membranes are designed to protect users from viruses, bacteria, and protozoa, including cysts and parasites. LifeSaver technology filters bacteria to at least Log 6 (99.9999%), viruses to at least Log 4 (99.99%), and cysts to at least Log 3 (99.99%). These performances meet NSF Protocol 231 and are based on the guidelines of the U.S. Environmental Protection Agency (EPA). This makes the C1 suitable for safely purifying microbiologically contaminated water sources.
With a total purification capacity of up to 500,000 liters of safe drinking water, the LifeSaver C1 delivers exceptionally high performance for a system of this size. Despite this enormous capacity, the device remains relatively light and robust, making it suitable for long-term use in a variety of conditions. The water flow is powerful and stable, making large quantities of drinking water available without using electricity or chemicals.
For maintenance and long-term reliability, the C1 is equipped with a built-in drain port that allows the filter to be routinely cleaned and flushed. The filter cartridges are easy to replace, allowing the system to remain usable for a long time. All product materials used are BPA- and BPS-free, as is the wastewater released during the flushing process.
An important safety feature of the LifeSaver C1 is the integrated FailSafe technology. As soon as the filter membranes become saturated or blocked, the water flow stops automatically. This prevents contaminated water from flowing out of the system under any circumstances and guarantees a constant quality of drinking water.
The C1 was designed with flexibility in mind. Multiple units can easily be connected to the same water source in a so-called daisy chain configuration, allowing the total water output to be significantly increased. In combination with the light and robust design, this makes the LifeSaver C1 particularly suitable for emergency situations, disaster relief, humanitarian aid, off-grid applications, and situations where fast and reliable access to safe drinking water is essential.
Practical product information
-
Type: microbiological water purifier with ultrafiltration technology
-
Total filter capacity: up to 500,000 liters of safe drinking water
-
Minimum required water pressure: 0.2 bar (2.85 PSI)
-
Connection: suitable for above-ground water tanks (min. 2 m height) and municipal water supply
-
Filtration level:
-
Bacteria: 99.9999% (Log 6)
-
Viruses: 99.99% (Log 4)
-
Cysts and protozoa: 99.99% (Log 3)
-
-
Technology: meets NSF Protocol 231 (EPA guidelines)
-
Weight: approximately 5.5 kg
-
Dimensions: approximately 36 × 26 × 25 cm
-
Material: BPA- and BPS-free
-
Power supply: no electricity required
-
Chemicals: not required
-
Maintenance: replaceable filter cartridges and built-in flush and drain port
-
Safety: FailSafe technology prevents flow through saturated filters
-
Scalability: multiple units connectable in daisy chain configuration
Estimated delivery time: 1 day (Netherlands), 1-2 (business)days (Belgium, Germany, France).
You can revoke your purchase within 30 days.
Secure payment:
LifeSaver C1 Large Scale Purifier – High-capacity water filter
LifeSaver C1 Large Scale Purifier
The LifeSaver C1 Large Scale Purifier was developed as a reliable and powerful solution for purifying large quantities of drinking water. The system is designed to be easily connected to an above-ground water storage tank located at least two meters above the ground, but can also be connected to a municipal water supply. For proper operation, only a minimum water pressure of 0.2 bar (2.85 PSI) is required. Thanks to this low pressure requirement, the user only needs to open the tap to immediately obtain a strong and constant flow of safe drinking water, without additional steps.
The C1 uses the same high-quality ultrafiltration membranes that are used in all LifeSaver water purifiers. These membranes are designed to protect users from viruses, bacteria, and protozoa, including cysts and parasites. LifeSaver technology filters bacteria to at least Log 6 (99.9999%), viruses to at least Log 4 (99.99%), and cysts to at least Log 3 (99.99%). These performances meet NSF Protocol 231 and are based on the guidelines of the U.S. Environmental Protection Agency (EPA). This makes the C1 suitable for safely purifying microbiologically contaminated water sources.
With a total purification capacity of up to 500,000 liters of safe drinking water, the LifeSaver C1 delivers exceptionally high performance for a system of this size. Despite this enormous capacity, the device remains relatively light and robust, making it suitable for long-term use in a variety of conditions. The water flow is powerful and stable, making large quantities of drinking water available without using electricity or chemicals.
For maintenance and long-term reliability, the C1 is equipped with a built-in drain port that allows the filter to be routinely cleaned and flushed. The filter cartridges are easy to replace, allowing the system to remain usable for a long time. All product materials used are BPA- and BPS-free, as is the wastewater released during the flushing process.
An important safety feature of the LifeSaver C1 is the integrated FailSafe technology. As soon as the filter membranes become saturated or blocked, the water flow stops automatically. This prevents contaminated water from flowing out of the system under any circumstances and guarantees a constant quality of drinking water.
The C1 was designed with flexibility in mind. Multiple units can easily be connected to the same water source in a so-called daisy chain configuration, allowing the total water output to be significantly increased. In combination with the light and robust design, this makes the LifeSaver C1 particularly suitable for emergency situations, disaster relief, humanitarian aid, off-grid applications, and situations where fast and reliable access to safe drinking water is essential.
Practical product information
-
Type: microbiological water purifier with ultrafiltration technology
-
Total filter capacity: up to 500,000 liters of safe drinking water
-
Minimum required water pressure: 0.2 bar (2.85 PSI)
-
Connection: suitable for above-ground water tanks (min. 2 m height) and municipal water supply
-
Filtration level:
-
Bacteria: 99.9999% (Log 6)
-
Viruses: 99.99% (Log 4)
-
Cysts and protozoa: 99.99% (Log 3)
-
-
Technology: meets NSF Protocol 231 (EPA guidelines)
-
Weight: approximately 5.5 kg
-
Dimensions: approximately 36 × 26 × 25 cm
-
Material: BPA- and BPS-free
-
Power supply: no electricity required
-
Chemicals: not required
-
Maintenance: replaceable filter cartridges and built-in flush and drain port
-
Safety: FailSafe technology prevents flow through saturated filters
-
Scalability: multiple units connectable in daisy chain configuration
Returns and exchanges
What are the return conditions?
At Outdoor-Food, you can return your purchase within 30 days of receipt. This is the statutory cooling-off period. To return your purchase, the item must be unused and, where reasonably possible, in its original packaging. If you purchased multiple items in a single order, the cooling-off period begins from the moment you receive the last item.
Items that cannot be returned:
-
Damaged or used items.
-
Items missing their original packaging.
- Lifestraw; for hygiene reasons, Lifestraw products cannot be returned if the packaging has been opened.
How do I return my purchase?
If you want to return an item, please contact our customer service first. The easiest way to do this is via service@outdoor-food.nl. We will then provide you with a return label, which you can use for the return. Once the return shipment has been approved, you can send the package to us. Pack the item carefully and, if possible, include a copy of the invoice in the package.
When will I receive my refund?
As soon as we have received and inspected your return, we will refund the full purchase price to your account as quickly as possible.
What if I received a damaged or incomplete item?
If your order is damaged or incomplete, please contact our customer service immediately upon receipt. Clearly state what is wrong with your order. We will then ensure that you receive the correct product in good condition as quickly as possible. In this case, the return costs are, of course, at our expense and we will launch an investigation with the parcel service.
Please note: Returns are at the buyer's risk, which means that we are not liable for damage to or loss of the package. Therefore, always request proof of postage from the postal agency and keep it safe.
What Our Customers Say
Thousands of satisfied outdoor enthusiasts went before you
"Delicious, nutritious meals and super convenient, top-quality cookware. Everything is lightweight, compact and perfect for on the go. Fast delivery, great service and truly made for outdoor enthusiasts. Highly recommended for every adventurer!"
"Fast and professional delivery.There was a small issue with the order, but it was resolved very quickly and professionally! Extremely satisfied with this great company! A solid 10👌"
"Ordered 2 great Jetboils here at a very competitive price. Also received excellent assistance with my order via WhatsApp. Many companies could learn a thing or two from them. I’ll definitely be buying from here again."








